Maintenance Of LSV Systems
How can you take care of LSV systems?
It is necessary in these times for factories, warehouses and storage units to have an industrial air-cooling system, that not only cools but also ventilates. In fact, W.H.O. recommends an increased ventilation rate through natural or mechanical means, preferably without recirculation of the air. Symphony Large Space Venti-Cooling takes care of all the measures suggested by W.H.O. It is a unique concept of evaporative air-cooling plus ventilation – a combination not offered by any other technology. It provides powerful cooling at every nook and cranny while consuming 90% less energy than air conditioners. What is noteworthy is that the space to be cooled need not be closed or sealed to employ these warehouse cooling units cooling. These warehouse cooling solutions are of special significance in the current times of the pandemic.
The simple technique of evaporative cooling is not just cost-effective and energy-efficient, but also emits no greenhouse gases and is low on maintenance and repairs. Symphony offers two technologically superior and smart-looking configurations of Venticool 25 and Venticool 20, with cooling pads on all four sides for greater effectiveness.
However, it does not mean that the cooling system needs no care at all. Regular check-up is important to maintain the powerful flow of refreshing and healthy air.
Post-installation, the following guidelines should be followed for a positive experience of Large Space Venti-Cooling the air cooler for warehouse.
- It is important to check whether the system requires seasonal or off-season maintenance. This is required to ensure that the system continues to perform optimally, which in turn makes employees comfortable and prevents the damage of goods stored.
- The cooling pads in Large Space Venti-Cooling should be regularly checked especially if the system has not been operative for a while. The honeycomb pads may become brittle if left dry for too long, which in turn prevents the absorption of water. The same may also happen if the pads are old and in use for a prolonged period of time.
- The motor belt in the Venticool 25 or Venticool 20 units must also be regularly inspected. The motor belts should be free of any cracks or splits in order for them to function smoothly
- If the cooling units are located on rooftops, they may be exposed to elements that can cause rust formation in metallic parts. This rust can form allergens that find their way through the ductwork into the workspace. Regular inspection and rust-prevention must be carried out.
- If the cooling units are located in spaces that are exposed to strong winds, then there are chances that debris and other unwanted materials will be deposited near the cooler, causing the unit’s airflow to be blocked.
- When the Large Space Venti-Cooling units are filled with water, only fresh and clean water ought to be used.
In order to ensure that the cooling units work at maximum efficiency, it must be ensured that the rooms which are being cooled have open windows and doors for cross-ventilation or ducts for removing stale air. This is because evaporative cooling works best when there is proper ventilation. It is also necessary for preventing the recirculation of air, keeping the workspace free of germs and pollutants.
